1- Go to the "Start" and then click "Control Panel".

2- Click on "Network and Internet".

3- Click on "Connect to a network".

4- Click on "Set up a connection or Network".

5- Click on "Connect to a workplace" then click "Next".

6- Click on "Use my Internet connection (VPN)".

7- In the "Internet Address" write: usip.rapidvpn.net. And in the "Destination name" write: RapidVPN. Make sure that the checkbox labeled "Don't connect now; just set it up so I can connect later" is checked.
Note: Please look bottom page to see the list of IP address.

8- Enter your username and password and click the "Create" button.

9- Click on "Close" button.

10- Click on "Connect to a network" again (See step 1-3).

11- Right-click on the "RapidVPN" connection and choose "Properties" from the menu.

12- Select "Options" and make sure the checkbox labeled "Include Windows logon domain" is unchecked. Then click the "PPP Settings" button.

13- In the "PPP Settings" dialog box, make sure the settings look like the ones in the picture below, then click the "OK".

14- Go to the "Security" tab and make sure the security tab has the same settings as here. Then click on "Setting" button.

15- Make sure that the Data encryption section is set to "Optional encryption". Other settings must like the picture.

16- Click on "Yes".

17- Go to the "Networking" tab, In the list of items that you see, make sure that only the "Internet Protocol Version 4(TCP/IPv4)" and "Client for Microsoft Networks" items are checked. If other protocols are checked, uncheck them by clicking on the checkbox and then click "OK".

20- When you connected to the Internet, go to the "Start" and then click "Connect To".

21- Right-click on the "RapidVPN" connection and choose "Connect" from the menu.

You can see all your VPN by the following step:
Open Start and type "ncpa.cpl" in the search box.

IMPORTANT:
1- Your windows firewall must be OFF! (Control Panel>Windows Firewall).
2- Make sure your other security software (like antivirus) allowed to VPN.
3- Vista & Seven users: Please disable UAC before installing VPN: Open up Control Panel, and type in "UAC" into the search box. You'll see a link for "Turn User Account Control (UAC) on or off":
4- You should try both protocols PPTP and L2TP to find out which protocol could work for you.

IP address:
 Personal (Dedicated) IP service, US/Ohio: usoh.rapidvpn.net
 Personal (Dedicated) IP service, US/California/Canyon Country: usca.rapidvpn.net
 Personal (Dedicated) IP service, US/California/Los Angeles: usla.rapidvpn.net
 Personal (Dedicated) IP service, US/Arizona: usaz.rapidvpn.net
 Personal (Dedicated) IP service, US/Texas: ustx.rapidvpn.net
 Personal (Dedicated) IP service, US/Illinois: usil.rapidvpn.net
 Personal (Dedicated) IP service, US/New York: usny.rapidvpn.net
 Personal (Dedicated) IP service, CANADA: caip.rapidvpn.net
 Personal (Dedicated) IP service, UK: ukip.rapidvpn.net
 Personal (Dedicated) IP service, NL: nlip.rapidvpn.net

If you have any problem or question, Please fell free to contact us.  ▲top