1- Go to the "Start" and then click "Control Panel".
2- Click on "Network and Internet".
3- Click on "Connect to a network".
4- Click on "Set up a connection or Network".
5- Click on "Connect to a workplace" then click "Next".
6- Click on "Use my Internet connection (VPN)".
7- In the "Internet Address" write: usip.rapidvpn.net (Please look bottom page to see list of IP address.). And in the
"Destination name" write: RapidVPN. Make sure that the checkbox labeled "Don't connect now; just set it up so I can connect later" is checked.
8- Enter your username and password and click the "Create" button.
9- Click on "Close" button..
10- Click on "Connect to a network" again.
11- Right-click on the "RapidVPN" connection and choose "Properties" from the menu.
12- Select "Options" and make sure the checkbox labeled "Include Windows logon domain" is unchecked.
Then click the "PPP Settings" button.
13- In the "PPP Settings" dialog box, make sure the settings look like the ones in the picture below, then click the "OK".
14- Go to the "Security" tab and make sure the security tab has the same settings as here. Then click on "Setting" button.
15- Make sure that the Data encryption section is set to "Optional encryption". Other
settings must like the picture.
16- Click on "Yes".
|
17- Go to the "Networking" tab, In the list of items that you see, make sure that only the "Internet Protocol Version 4(TCP/IPv4)" and "Client for Microsoft Networks" items are checked. If other protocols are checked, uncheck them by clicking on the checkbox and then click "OK".
|
IMPORTANT: Your windows firewall must be
OFF! (Control Panel>Windows Firewall)
IP address:
Personal (Dedicated) IP service, US/Ohio: usoh.rapidvpn.net
Personal (Dedicated) IP service, CA: caip.rapidvpn.net
Monthly_Static service: usip.rapidvpn.net
If you have any problem or question, Please fell free to contact us.
▲top
|
How to create VPN (