1- Go to the "Start" and then click "Control Panel".

 

 

2- Click on "Network and Internet".

 

 

3- Click on "Connect to a network".

 

 

4- Click on "Set up a new connection or Network".

 

 

5- Click on "Connect to a workplace" then click "Next".

 

 

6- Click on "Use my Internet connection (VPN)".

 

 

7- In the "Internet Address" write for example: ustx.rapidvpn.net. And in the "Destination name" write: RapidVPN. Make sure that the checkbox labeled "Don't connect now; just set it up so I can connect later" is checked.

Note: Please look bottom page to see the list of IP address.

 

 

8- Enter your username and password and click the "Create" button.

 

 

9- Click on "Close" button.

 

 

10- Click on "Connect to a network" again (See step 1-3).

 

 

11- Right-click on the "RapidVPN" connection and choose "Properties" from the menu.

 

 

12- Select "Options" and make sure the checkbox labeled "Include Windows logon domain" is unchecked. Then click the "PPP Settings" button.

 

 

13- In the "PPP Settings" dialog box, make sure the settings look like the ones in the picture below, then click the "OK".

 

 

14- Go to the "Security" tab and make sure the security tab has the same settings as here. Then click on "Setting" button..

 

 

15- Make sure that the Data encryption section is set to "Optional encryption". Other settings must like the picture.

 

16- Click on "Yes".

 

 

17- Go to the "Networking" tab, click on the "Type of VPN" pop-up menu and select "L2TP/IPsec" and then click on the "IPsec Settings" button.

 

 

18- In the "IPsec Settings" dialog, click the radio button labeled "Use preshared key for authentication", Then write "8870680" into the textbox labeled "Key", Then click the "OK" button.

 

 

19- Click the "OK" button to save your settings.

 

 

20- When you connected to the Internet, go to the "Start" and then click "Connect To".

 

 

21- Right-click on the "RapidVPN" connection and choose "Connect" from the menu.

 

 

 

You can see your RapidVPN connection by Open up Start menu and type "ncpa.cpl" in the search box.

 

 

 

IMPORTANT:

1- Your windows firewall must be OFF! (Control Panel>Windows Firewall).
2- Make sure your other security software (like antivirus) allowed to VPN.
3- You should try both protocols PPTP and L2TP to find out which protocol could work for you.

 

IP address:

 Personal (Dedicated) IP service, USA/Ohio - Columbus: usoh.rapidvpn.net
 Personal (Dedicated) IP service, USA/California - Canyon Country: usca.rapidvpn.net
 Personal (Dedicated) IP service, USA/California - Los Angeles: usla.rapidvpn.net
 Personal (Dedicated) IP service, USA/Arizona - Tempe: usaz.rapidvpn.net
 Personal (Dedicated) IP service, USA/Texas - Houston: ustx.rapidvpn.net
 Personal (Dedicated) IP service, USA/Illinois - Chicago: usil.rapidvpn.net
 Personal (Dedicated) IP service, USA/New York: usny.rapidvpn.net
 Personal (Dedicated) IP service, Canada - Quebec: caip.rapidvpn.net
 Personal (Dedicated) IP service, United Kingdom - London: ukip.rapidvpn.net
 Personal (Dedicated) IP service, Netherlands - Amsterdam: nlip.rapidvpn.net
 Personal (Dedicated) IP service, Switzerland - Zurich: chip.rapidvpn.net
 Personal (Dedicated) IP service, Sweden - Hudiksvall: seip.rapidvpn.net
 Personal (Dedicated) IP service, Germany - Munich: deip.rapidvpn.net